Product introduction:

1.Intelligent pendulum brake is after many years of careful development, development, production of intelligent channel management equipment,it is the main channel for personnel carries on the intelligent management of the high-tech products.The equipment organically integrates with machinery, electronics, microprocessor control and various identification technology, through selecting various identification system equipment and using the reliable performance of safety protection devices, alarm device, directions, and expand friendly LED count display interface, to have a coordination realization to channel intelligent control and management.Intelligent brake can compatible with IC CARDS, ID CARDS, barcode CARDS, such as fingerprint identification card reader to the equipment use, for staff in and out of civilization, orderly traffic, effective management of personnel in and out.it can be widely used in the station, wharf, subway, factory, building, intelligent community, hotels, clubs, enterprises need to channel to realize intelligent management.it is maily divided into: Single machine: used for single channel and multi-channel;Double machine: used for multi channel

2.Function and characteristics
2.1 standard product function characteristics:
1) have breakdown self-check and alarm prompt function, easy maintenance and use;
2)Through on the main control board's built-in small press plate,it can be programed the running state of the devices;
3) mechanical structure clamp, prevent collision prevention function, in the process of swing arm reset blocked, within the prescribed time, the motor stop working automatically, the default time delay after reset again (until it is reset), and the strength is very small (2 kg) or less;
4) impact resistant, without receiving the start signal, automatic swing arm lock;
5) synchronous swing arm is adjustable (for double pendulum);
6) with automatic reset function, after the flood, within the prescribed period of time when not in use, the system will automatically cancel the user's access permissions;
7) adjustable normally open or normally closed, to meet the requirements of different site;
8) can be hooked up with a variety of reading card device, relay switch reception work;
9) one-way, two-way function and can be one-way or two-way control personnel in and out;
10) can be directly through the computer to realize remote control and management;
11) delay automatic reset, standard is to autiomatically reset after the open of 5 seconds.;
12) Swing arm pull out automatically while out of power, and close automatically while in power, conforming to the requirements of the fire.

2.2 extensible function:
1) sound and light alarm function, including illegal intrusion alarm, the anti-pinch alarm, etc;
2) count function;
3) infrared reset function;
4) Case lengthen, swing arm extended, etc.


3, the main structure and configuration

Standard case: 1
Swing arm: 1
Panel :1 set
Direction Dashboard:1
Transformer: 2
Motor: 1
Movement and transmission part: 1 set